Maintenance of the hole opener

During the daily use of the hole opener, relevant maintenance work needs to be carried out to ensure that the hole opener can be used normally for a long time. Next, the 258 platform Xiaobian will introduce the maintenance work of the hole opener.

The used hole opener, we have to clean, the first to disassemble the entire hole opener, clean the interior, remove the waste debris left inside the hole opener, and then install the hole opener, followed by the installation after the surface is wiped clean, and finally put the hole opener in an environment suitable for storage.

After the hole opener is installed on the electric drill, it can be arbitrarily cut on any surface such as the plane or spherical surface of copper, iron, stainless steel, plexiglass and other plates. Flexible, convenient and safe to use. The maintenance of the perforator has the following points:

1. Select a machine that uses a high quality installation opener. As an important consumable accessory of the machine, only a good horse with a good saddle will be more conducive to the life of the hole saw.

2. For the use of cutting fluid to correct, appropriate amount. Wood or plastic, gypsum board and other soft materials when punching, generally do not need to use cutting fluid, but if it is cutting metal, alloy, ceramic, ceramic tile and other hard and hot materials, you need to add cutting fluid.

3. Choose the right material and select the right opener for cutting is the most important factor to greatly extend the service life. There is no one with a hole can be suitable for all the opening requirements, and a variety of different forms and characteristics of the sawtooth has its different utility, to choose a suitable cutting material and cutting of the hole, the hole shape and tooth spacing are very important factors.